@article{8371,
  author = {H. J. N. van Eck and H. H. J. Ten Kate and A. V. Dudarev and T. Mulder and A. Hervé},
  title = {A 2.5 T, 1.25 m Free Bore Superconducting Magnet for the Magnum-PSI Linear Plasma Generator},
  abstract = {DIFFER's main experiment Magnum-PSI is the only laboratory setup in the world capable of exposing materials to plasma conditions similar to those of future fusion reactors. The success of the Magnum-PSI experiment depends on the generation of a 2.5 T magnetic field without restricting the diagnostic access and operational aspects of the experiment. This has been achieved with a magnet consisting of five superconducting solenoids wound on a 2.5 m long stainless steel coil former positioned in a cryostat offering a 1.25 m warm bore. A copper stabilized multifilamentary NbTi conductor with a 3.48 mm 2 cross section has been used, thus the magnet exhibits a total inductance of 500 H and a stored energy of 16 MJ. This presents quite a challenge for the protection scheme that has been implemented using a mix of back-to-back cold diodes and external dump resistors. The coils generate a plateau shaped magnetic field adjustable up to 2.5 T while the distance between the coils allows for 16 room temperature view-ports. The coils are cooled with liquid helium using a re-condensing system operated with cryocoolers, while the magnet system cycles between zero and full field up to once per day.
},
  year = {2018},
  journal = {IEEE Transactions on Applied Superconductivity},
  volume = {28},
  pages = {4203305},
  doi = {10.1109/TASC.2017.2779510},
  language = {eng},
}