Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect

TitleMicromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
Publication TypeJournal Article
Year of Publication2019
AuthorsD. Terentyev, L. Tanure, A. Bakaeva, A. Dubinko, V. Nikolic, J. Riesch, K. Verbeken, S. Lebediev, E.E Zhurkin
JournalInternational Journal of Refractory Metals and Hard Materials
Volume81
Pagination253-271
Date Published06/2019
Abstract

Due to its high strength and low temperature ductility, tungsten fibers (W f ) have been widely used as reinforcement elements in metallic, ceramic and glass matrix composites to improve the strength, toughness and creep resistance. Materials designed for future fusion reactors also utilize the option of W f reinforcement, i.a. with a copper (W f /Cu) or tungsten (W f /W) matrix. W f /W composites are being intensively studied as risk-mitigation materials to replace bulk tungsten which is susceptible to embrittlement induced by neutrons resulting from fusion reaction. Operation of W f /W in high temperatures (up to 1300 °C and even higher) fusion environment implies a risk of recrystallization and grain growth, which dimishes the attractive properties of tungsten fibers. In this work, we assess this modification of micro-mechanical and microstructural properties of tungsten fibers by means of nanoindentation, scanning electron microscopy, electron back-scattering diffraction analysis and corelate it with the ultimate tensile strength and fracture modes observed in the tensile tests. Both pure W and pottasium doped wires in the as-fabricated and annealed states are investigated and the results are compared with bulk tungsten, also exposed to several annealing temperatures. The results highlight the postive impact of potassium doping which shifts the threshold temperature for the grain growth by about 600 °C compared to pure tungsten wire. The results of the nanoindentation revealed systematic linear correlation with the ultimate tensile strength, which therefore offers a complimenatary way of micro-mechanical testing linking it with macro-scale properties of the wires.

DOI10.1016/j.ijrmhm.2019.03.012
Division

PSI

Department

PMI

PID

9a2288dc3fc6fe5c91273962296a2734

Alternate TitleInt. J. Refract. Met. H.

Go back one page.