Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasilinear gyrokinetic code QuaLiKiz is applied for successful predictions of core kinetic profiles in an ASDEX Upgrade H-mode discharge in the turbulence dominated region within the integrated modelling suite JETTO. Neoclassical contributions are calculated by NCLASS; auxiliary heat and particle deposition profiles due to NBI and ECRH are prescribed from previous analysis with TRANSP. Turbulent and neoclassical contributions are insufficient in explaining main ion heat and particle transport inside the q = 1 surface, necessitating the prescription of further transport coefficients to mimic the impact of MHD activity on central transport. The ion to electron temperature ratio at the simulation boundary at p tor=0.85 stabilizes ion scale modes while destabilizing ETG modes when significantly exceeding unity. Careful analysis of experimental measurements using Gaussian process regression techniques is carried out to explore reasonable uncertainties. In following trace W impurity transport simulations performed with additionally NEO, neoclassical transport under consideration of poloidal asymmetries alone is found to be insufficient to establish hollow central W density profiles. Reproduction of these conditions measured experimentally is found possible only when assuming the direct impact of a saturated (m, n) = (1, 1) MHD mode on heavy impurity transport.

VL - 59 IS - 1 U1 -FP

U2 -IMT

U5 - 6d42c99c474c747f17f4b44236cecb27 ER - TY - JOUR T1 - Diagnostics for plasma control - From ITER to DEMO JF - Fusion Engineering and Design Y1 - 2019 A1 - Biel, W. A1 - Albanese, R. A1 - Ambrosino, R. A1 - Ariola, M. A1 - van Berkel, M. A1 - Bolshakova, I. A1 - Brunner, K. J. A1 - Cavazzana, R. A1 - Cecconello, M. A1 - Conroy, S. A1 - Dinklage, A. A1 - Duran, I. A1 - Dux, R. A1 - Eade, T. A1 - Entler, S. A1 - Ericsson, G. A1 - Fable, E. A1 - Farina, D. A1 - Figini, L. A1 - Finotti, C. A1 - Franke, T. A1 - Giacomelli, L. A1 - Giannone, L. A1 - Gonzalez, W. A1 - Hjalmarsson, A. A1 - Hron, M. A1 - Janky, F. A1 - Kallenbach, A. A1 - Kogoj, J. A1 - Konig, R. A1 - Kudlacek, O. A1 - Luis, R. A1 - Malaquias, A. A1 - Marchuk, O. A1 - Marchiori, G. A1 - Mattei, M. A1 - Maviglia, F. A1 - De Masi, G. A1 - Mazon, D. A1 - Meister, H. A1 - Meyer, K. A1 - Micheletti, D. A1 - Nowak, S. A1 - Piron, C. A1 - Pironti, A. A1 - Rispoli, N. A1 - Rohde, V. A1 - Sergienko, G. A1 - El Shawish, S. A1 - Siccinio, M. A1 - Silva, A. A1 - da Silva, F. A1 - Sozzi, C. A1 - Tardocchi, M. A1 - Tokar, M. A1 - Treutterer, W. A1 - Zohm, H. KW - DEMO KW - ITER KW - Plasma control KW - plasma diagnostics KW - TOKAMAK AB - The plasma diagnostic and control (D&C) system for a future tokamak demonstration fusion reactor (DEMO) will have to provide reliable operation near technical and physics limits, while its front-end components will be subject to strong adverse effects within the nuclear and high temperature plasma environment. The ongoing developments for the ITER D&C system represent an important starting point for progressing towards DEMO. Requirements for detailed exploration of physics are however pushing the ITER diagnostic design towards using sophisticated methods and aiming for large spatial coverage and high signal intensities, so that many front-end components have to be mounted in forward positions. In many cases this results in a rapid aging of diagnostic components, so that additional measures like protection shutters, plasma based mirror cleaning or modular approaches for frequent maintenance and exchange are being developed. Under the even stronger fluences of plasma particles, neutron/gamma and radiation loads on DEMO, durable and reliable signals for plasma control can only be obtained by selecting diagnostic methods with regard to their robustness, and retracting vulnerable front-end components into protected locations. Based on this approach, an initial DEMO D&C concept is presented, which covers all major control issues by signals to be derived from at least two different diagnostic methods (risk mitigation). VL - 146 IS - Part A U1 - FP U2 - IMT U5 - c4313c834ea92087440de84a1d6dcea7 ER - TY - JOUR T1 - The physics and technology basis entering European system code studies for DEMO JF - Nuclear Fusion Y1 - 2017 A1 - Wenninger, R. A1 - Kembleton, R. A1 - Bachmann, C. A1 - Biel, W. A1 - Bolzonella, T. A1 - Ciattaglia, S. A1 - Cismondi, F. A1 - Coleman, M. A1 - Donne, A. J. H. A1 - Eich, T. A1 - Fable, E. A1 - Federici, G. A1 - Franke, T. A1 - Lux, H. A1 - Maviglia, F. A1 - Meszaros, B. A1 - Putterich, T. A1 - Saarelma, S. A1 - Snickers, A. A1 - Villone, F. A1 - Vincenzi, P. A1 - Wolff, D. A1 - Zohm, H. AB -A large scale program to develop a conceptual design for a demonstration fusion power plant (DEMO) has been initiated in Europe. Central elements are the baseline design points, which are developed by system codes. The assessment of the credibility of these design points is often hampered by missing information. The main physics and technology content of the central European system codes have been published (Kovari et al 2014 Fusion Eng. Des . 89 3054–69, 2016 Fusion Eng. Des . 104 9–20, Reux et al 2015 Nucl. Fusion 55 073011). In addition, this publication discusses key input parameters for the pulsed and conservative design option...).

VL - 57 UR - http://www.euro-fusionscipub.org/wp-content/uploads/WPPMIPR16_16121_submitted.pdf IS - 1 U1 -FP

U2 -TP

U3 - FP120 U5 - 6b859a47ed93fe9914481453756cfbce ER - TY - JOUR T1 - Integrated core–SOL–divertor modelling for ITER including impurity: effect of tungsten on fusion performance in H-mode and hybrid scenario JF - Nuclear Fusion Y1 - 2015 A1 - Zagorski, R. A1 - Voitsekhovitch, I. A1 - Ivanova-Stanik, I. A1 - Kochl, F. A1 - da Silva Aresta Belo, P. A1 - Fable, E. A1 - Garcia, J. A1 - Garzotti, L. A1 - Hobirk, J. A1 - Hogeweij, G. M. D. A1 - Joffrin, E. A1 - X. Litaudon A1 - Polevoi, A. R. A1 - Telesca, G. A1 - JET Contributors AB -The compatibility of two operational constraints—operation above the L–H power threshold and at low power to divertor—is examined for ITER long pulse H-mode and hybrid scenarios in integrated core–scrape off layer (SOL)–divertor modelling including impurities (intrinsic Be, He, W and seeded Ne). The core thermal, particle and momentum transport is simulated with the GLF23 transport model tested in the self-consistent simulations of temperatures, density and toroidal rotation velocity in JET hybrid discharges and extrapolated to ITER. The beneficial effect of toroidal rotation velocity on fusion gain is shown. The sensitivity studies with respect to operational (separatrix and pedestal density, Ne gas puff) and unknown physics (W convective velocity and perpendicular diffusion in SOL as well as W prompt re-deposition) parameters are performed to determine their influence on the operational window and fusion gain.

VL - 55 IS - 5 U1 -FP

U2 -CPP-HT

U5 - 88a082ba90add46139f1b78733b8692b ER - TY - JOUR T1 - Fast-ion transport in the presence of magnetic reconnection induced by sawtooth oscillations in ASDEX Upgrade JF - Nuclear Fusion Y1 - 2014 A1 - Geiger, B. A1 - M. García-Muñoz A1 - Dux, R. A1 - Ryter, F. A1 - Tardini, G. A1 - Orte, L. B. A1 - Classen, I.G.J. A1 - Fable, E. A1 - Fischer, R. A1 - Igochine, V. A1 - McDermott, R. M. AB - The transport of beam-generated fast ions has been investigated experimentally at the ASDEX Upgrade tokamak in the presence of sawtooth crashes. After sawtooth crashes, phase space resolved fast-ion D-alpha measurements show a significant reduction of the central fast-ion density-more than 50%-together with an increase at larger radii. The corresponding loss of fast particles, detected by a fast-ion loss detector outside the plasma, is marginal during the crash phase, which proves that the sawteeth internally redistribute fast ions. This is also well reproduced by modelling results in which the fast-ion redistribution is assumed to be in line with the sawtooth-induced change of the magnetic field topology. The simulation, however, underestimates the total amount of redistributed fast ions which can be explained by additional drift effects. In the time intervals between the crashes, a neoclassical fast-ion behaviour is observed. Radial profiles and measured decay rates of the redistributed fast ions show that any anomalous fast-ion diffusion in between sawtooth crashes is well below 0.5m(2) s(-1). VL - 54 SN - 0029-5515 IS - 2 U1 - FP U2 - PDG U5 - 497115d93461cae747effb44b06404d9 ER - TY - JOUR T1 - Modelling of JET hybrid scenarios with GLF23 transport model: E × B shear stabilization of anomalous transport JF - Nuclear Fusion Y1 - 2014 A1 - Voitsekhovitch, I. A1 - da Silva Aresta Belo, P. A1 - Citrin, J. A1 - Fable, E. A1 - Ferreira, J. A1 - Garcia, J. A1 - Garzotti, L. A1 - Hobirk, J. A1 - Hogeweij, G. M. D. A1 - Joffrin, E. A1 - Kochl, F. A1 - X. Litaudon A1 - Moradi, S. A1 - Nabais, F. A1 - JET-EFDA Contributors A1 - EU-ITM ITER Scenario Modelling group KW - E x B shear stabilization KW - hybrid scenario KW - transport modelling AB -The E × B shear stabilization of anomalous transport in JET hybrid discharges is studied via self-consistent predictive modelling of electron and ion temperature, ion density and toroidal rotation velocity performed with the GLF23 model. The E × B shear stabilization factor (parameter α E in the GLF23 model) is adjusted to predict accurately the four simulated quantities under different experimental conditions, and the uncertainty in α E determined by 15% deviation between simulated and measured quantities is estimated. A correlation of α E with toroidal rotation velocity and E × B shearing rate is found in the low density plasmas, suggesting that the turbulence quench rule may be more complicated than assumed in the GLF23 model with constant α E . For the selected discharges the best predictive accuracy is obtained by using weak/no E × B shear stabilization (i.e. α E ≈ 0) at low toroidal angular frequency (Ω < 60 krad s −1 ), even in the scenarios with the current overshoot, and α E = 0.9 at high frequency (Ω > 100 krad s −1 ). Interestingly, a weak E × B shear stabilization of anomalous transport is found in the medium density strongly rotating discharge. An importance of linear β e stabilization in this discharge is estimated and compared to the low density discharge with equally high β e . The toroidal rotation velocity is well predicted here by assuming that the momentum diffusion coefficient is a fraction of thermal ion diffusivity. Taking into account the α E and Prandtl number with their uncertainties determined in the modelling of JET hybrid discharges, the performance of ITER hybrid scenario with optimized heat mix (33 MW of NBI and 20 MW of ECCD) is estimated showing the importance of toroidal rotation for achieving Q > 5.

VL - 54 UR - http://www.iop.org/Jet/article?EFDP13041&EFDP13048 IS - 9 U1 -FP

U2 -CPP-HT

U5 - da2cf17455ede8d649edf343a88bdd87 ER - TY - JOUR T1 - Modelling of hybrid scenario: from present-day experiments towards ITER JF - Nuclear Fusion Y1 - 2013 A1 - X. Litaudon A1 - Voitsekhovitch, I. A1 - Artaud, J. F. A1 - Belo, P. A1 - Bizarro, J. P. S. A1 - Casper, T. A1 - Citrin, J. A1 - Fable, E. A1 - Ferreira, J. A1 - Garcia, J. A1 - Garzotti, L. A1 - Giruzzi, G. A1 - Hobirk, J. A1 - Hogeweij, G. M. D. A1 - Imbeaux, F. A1 - Joffrin, E. A1 - Koechl, F. A1 - Liu, F. A1 - Lonnroth, J. A1 - Moreau, D. A1 - Parail, V. A1 - Schneider, M. A1 - Snyder, P. B. A1 - ASDEX-Upgrade Team A1 - JET-EFDA Contributors A1 - EU-ITM ITER Scenario Modelling group AB -The ‘hybrid’ scenario is an attractive operating scenario for ITER since it combines long plasma duration with the reliability of the reference H-mode regime. We review the recent European modelling effort carried out within the Integrated Scenario Modelling group which aims at (i) understanding the underlying physics of the hybrid regime in ASDEX-Upgrade and JET and (ii) extrapolating them towards ITER. JET and ASDEX-Upgrade hybrid scenarios performed under different experimental conditions have been simulated in an interpretative and predictive way in order to address the current profile dynamics and its link with core confinement, the relative importance of magnetic shear, s , and E × B flow shear on the core turbulence, pedestal stability and H–L transition. The correlation of the improved confinement with an increased s / q at outer radii observed in JET and ASDEX-Upgrade discharges is consistent with the predictions based on the GLF23 model applied in the simulations of the ion and electron kinetic profiles. Projections to ITER hybrid scenarios have been carried out focusing on optimization of the heating/current drive schemes to reach and ultimately control the desired plasma equilibrium using ITER actuators. Firstly, access condition to the hybrid-like q -profiles during the current ramp–up phase has been investigated. Secondly, from the interpreted role of the s / q ratio, ITER hybrid scenario flat-top performance has been optimized through tailoring the q -profile shape and pedestal conditions. EPED predictions of pedestal pressure and width have been used as constraints in the interpretative modelling while the core heat transport is predicted by GLF23. Finally, model-based approach for real-time control of advanced tokamak scenarios has been applied to ITER hybrid regime for simultaneous magnetic and kinetic profile control.

VL - 53 U1 -FP

U2 -CPP-HT

U5 - 1e865efa4611fccf9bfb441bffcf216a ER - TY - JOUR T1 - Overview of ASDEX Upgrade results JF - Nuclear Fusion Y1 - 2013 A1 - Stroth, U. A1 - Adamek, J. A1 - Aho-Mantila, L. A1 - Akaslompolo, S. A1 - Amdor, C. A1 - Angioni, C. A1 - Balden, M. A1 - Bardin, S. A1 - L. Barrera Orte A1 - Behler, K. A1 - Belonohy, E. A1 - Bergmann, A. A1 - Bernert, M. A1 - Bilato, R. A1 - Birkenmeier, G. A1 - Bobkov, V. A1 - Boom, J. A1 - Bottereau, C. A1 - Bottino, A. A1 - Braun, F. A1 - Brezinsek, S. A1 - Brochard, T. A1 - M. Brüdgam A1 - Buhler, A. A1 - Burckhart, A. A1 - Casson, F. J. A1 - Chankin, A. A1 - Chapman, I. A1 - Clairet, F. A1 - Classen, I.G.J. A1 - Coenen, J. W. A1 - Conway, G. D. A1 - Coster, D. P. A1 - Curran, D. A1 - da Silva, F. A1 - P. de Marné A1 - D'Inca, R. A1 - Douai, D. A1 - Drube, R. A1 - Dunne, M. A1 - Dux, R. A1 - Eich, T. A1 - Eixenberger, H. A1 - Endstrasser, N. A1 - Engelhardt, K. A1 - Esposito, B. A1 - Fable, E. A1 - Fischer, R. A1 - H. Fünfgelder A1 - Fuchs, J. C. A1 - K. Gál A1 - M. García Muñoz A1 - Geiger, B. A1 - Giannone, L. A1 - T. Görler A1 - da Graca, S. A1 - Greuner, H. A1 - Gruber, O. A1 - Gude, A. A1 - Guimarais, L. A1 - S. Günter A1 - Haas, G. A1 - Hakola, A. H. A1 - Hangan, D. A1 - Happel, T. A1 - T. Härtl A1 - Hauff, T. A1 - Heinemann, B. A1 - Herrmann, A. A1 - Hobirk, J. A1 - H. Höhnle A1 - M. Hölzl A1 - Hopf, C. A1 - Houben, A. A1 - Igochine, V. A1 - Ionita, C. A1 - Janzer, A. A1 - Jenko, F. A1 - Kantor, M. A1 - C.-P. Käsemann A1 - Kallenbach, A. A1 - S. Kálvin A1 - Kantor, M. A1 - Kappatou, A. A1 - Kardaun, O. A1 - Kasparek, W. A1 - Kaufmann, M. A1 - Kirk, A. A1 - H.-J. Klingshirn A1 - Kocan, M. A1 - Kocsis, G. A1 - Konz, C. A1 - Koslowski, R. A1 - Krieger, K. A1 - Kubic, M. A1 - Kurki-Suonio, T. A1 - Kurzan, B. A1 - Lackner, K. A1 - Lang, P. T. A1 - Lauber, P. A1 - Laux, M. A1 - Lazaros, A. A1 - Leipold, F. A1 - Leuterer, F. A1 - Lindig, S. A1 - Lisgo, S. A1 - Lohs, A. A1 - Lunt, T. A1 - Maier, H. A1 - Makkonen, T. A1 - Mank, K. A1 - M.-E. Manso A1 - Maraschek, M. A1 - Mayer, M. A1 - McCarthy, P. J. A1 - McDermott, R. A1 - Mehlmann, F. A1 - Meister, H. A1 - Menchero, L. A1 - Meo, F. A1 - Merkel, P. A1 - Merkel, R. A1 - Mertens, V. A1 - Merz, F. A1 - Mlynek, A. A1 - Monaco, F. A1 - Müller, S. A1 - H.W. Müller A1 - M. Münich A1 - Neu, G. A1 - Neu, R. A1 - Neuwirth, D. A1 - Nocente, M. A1 - Nold, B. A1 - Noterdaeme, J. M. A1 - Pautasso, G. A1 - Pereverzev, G. A1 - B. Plöckl A1 - Podoba, Y. A1 - Pompon, F. A1 - Poli, E. A1 - Polozhiy, K. A1 - Potzel, S. A1 - Puschel, M. J. A1 - Putterich, T. A1 - Rathgeber, S. K. A1 - Raupp, G. A1 - Reich, M. A1 - Reimold, F. A1 - Ribeiro, T. A1 - Riedl, R. A1 - Rohde, V. A1 - van Rooij, G. J. A1 - Roth, J. A1 - Rott, M. A1 - Ryter, F. A1 - Salewski, M. A1 - Santos, J. A1 - Sauter, P. A1 - Scarabosio, A. A1 - Schall, G. A1 - Schmid, K. A1 - Schneider, P. A. A1 - Schneider, W. A1 - Schrittwieser, R. A1 - Schubert, M. A1 - Schweinzer, J. A1 - Scott, B. A1 - Sempf, M. A1 - Sertoli, M. A1 - Siccinio, M. A1 - Sieglin, B. A1 - Sigalov, A. A1 - Silva, A. A1 - Sommer, F. A1 - A. Stäbler A1 - Stober, J. A1 - Streibl, B. A1 - Strumberger, E. A1 - Sugiyama, K. A1 - Suttrop, W. A1 - Tala, T. A1 - Tardini, G. A1 - Teschke, M. A1 - Tichmann, C. A1 - Told, D. A1 - Treutterer, W. A1 - Tsalas, M. A1 - VanZeeland, M. A. A1 - Varela, P. A1 - Veres, G. A1 - Vicente, J. A1 - Vianello, N. A1 - Vierle, T. A1 - Viezzer, E. A1 - Viola, B. A1 - Vorpahl, C. A1 - Wachowski, M. A1 - Wagner, D. A1 - Wauters, T. A1 - Weller, A. A1 - Wenninger, R. A1 - Wieland, B. A1 - Willensdorfer, M. A1 - Wischmeier, M. A1 - Wolfrum, E. A1 - E. Würsching A1 - Yu, Q. A1 - Zammuto, I. A1 - Zasche, D. A1 - Zehetbauer, T. A1 - Zhang, Y. A1 - Zilker, M. A1 - Zohm, H. AB - The medium size divertor tokamak ASDEX Upgrade (major and minor radii 1.65 m and 0.5 m, respectively, magnetic-field strength 2.5 T) possesses flexible shaping and versatile heating and current drive systems. Recently the technical capabilities were extended by increasing the electron cyclotron resonance heating (ECRH) power, by installing 2 × 8 internal magnetic perturbation coils, and by improving the ion cyclotron range of frequency compatibility with the tungsten wall. With the perturbation coils, reliable suppression of large type-I edge localized modes (ELMs) could be demonstrated in a wide operational window, which opens up above a critical plasma pedestal density. The pellet fuelling efficiency was observed to increase which gives access to H-mode discharges with peaked density profiles at line densities clearly exceeding the empirical Greenwald limit. Owing to the increased ECRH power of 4 MW, H-mode discharges could be studied in regimes with dominant electron heating and low plasma rotation velocities, i.e. under conditions particularly relevant for ITER. The ion-pressure gradient and the neoclassical radial electric field emerge as key parameters for the transition. Using the total simultaneously available heating power of 23 MW, high performance discharges have been carried out where feed-back controlled radiative cooling in the core and the divertor allowed the divertor peak power loads to be maintained below 5 MW m −2 . Under attached divertor conditions, a multi-device scaling expression for the power-decay length was obtained which is independent of major radius and decreases with magnetic field resulting in a decay length of 1 mm for ITER. At higher densities and under partially detached conditions, however, a broadening of the decay length is observed. In discharges with density ramps up to the density limit, the divertor plasma shows a complex behaviour with a localized high-density region in the inner divertor before the outer divertor detaches. Turbulent transport is studied in the core and the scrape-off layer (SOL). Discharges over a wide parameter range exhibit a close link between core momentum and density transport. Consistent with gyro-kinetic calculations, the density gradient at half plasma radius determines the momentum transport through residual stress and thus the central toroidal rotation. In the SOL a close comparison of probe data with a gyro-fluid code showed excellent agreement and points to the dominance of drift waves. Intermittent structures from ELMs and from turbulence are shown to have high ion temperatures even at large distances outside the separatrix. VL - 53 UR - http://hdl.handle.net/11858/00-001M-0000-0026-E166-7 IS - 10 U1 - FP U2 - PDG U5 - 0b5b08fdc590c85cc01e6d1db1958848 ER - TY - JOUR T1 - Overview of ASDEX Upgrade results JF - Nuclear Fusion Y1 - 2011 A1 - Kallenbach, A. A1 - Adamek, J. A1 - Aho-Mantila, L. A1 - Akaslompolo, S. A1 - Angioni, C. A1 - Atanasiu, C. V. A1 - Balden, M. A1 - Behler, K. A1 - Belonohy, E. A1 - Bergmann, A. A1 - Bernert, M. A1 - Bilato, R. A1 - Bobkov, V. A1 - Boom, J. A1 - Bottino, A. A1 - Braun, F. A1 - Brudgam, M. A1 - Buhler, A. A1 - Burckhart, A. A1 - Chankin, A. A1 - Classen, I.G.J. A1 - Conway, G. D. A1 - Coster, D. P. A1 - de Marne, P. A1 - D'Inca, R. A1 - Drube, R. A1 - Dux, R. A1 - Eich, T. A1 - Endstrasser, N. A1 - Engelhardt, K. A1 - Esposito, B. A1 - Fable, E. A1 - Fahrbach, H. U. A1 - Fattorini, L. A1 - Fischer, R. A1 - Flaws, A. A1 - Funfgelder, H. A1 - Fuchs, J. C. A1 - Gal, K. A1 - Munoz, M. G. A1 - Geiger, B. A1 - Adamov, M. G. A1 - Giannone, L. A1 - Giroud, C. A1 - Gorler, T. A1 - da Graca, S. A1 - Greuner, H. A1 - Gruber, O. A1 - Gude, A. A1 - Gunter, S. A1 - Haas, G. A1 - Hakola, A. H. A1 - Hangan, D. A1 - Happel, T. A1 - Hauff, T. A1 - Heinemann, B. A1 - Herrmann, A. A1 - Hicks, N. A1 - Hobirk, J. A1 - Hohnle, H. A1 - Holzl, M. A1 - Hopf, C. A1 - Horton, L. A1 - Huart, M. A1 - Igochine, V. A1 - Ionita, C. A1 - Janzer, A. A1 - Jenko, F. A1 - Kasemann, C. P. A1 - Kalvin, S. A1 - Kardaun, O. A1 - Kaufmann, M. A1 - Kirk, A. A1 - Klingshirn, H. J. A1 - Kocan, M. A1 - Kocsis, G. A1 - Kollotzek, H. A1 - Konz, C. A1 - Koslowski, R. A1 - Krieger, K. A1 - Kurki-Suonio, T. A1 - Kurzan, B. A1 - Lackner, K. A1 - Lang, P. T. A1 - Lauber, P. A1 - Laux, M. A1 - Leipold, F. A1 - Leuterer, F. A1 - Lohs, A. A1 - N C Luhmann Jr. A1 - Lunt, T. A1 - Lyssoivan, A. A1 - Maier, H. A1 - Maggi, C. A1 - Mank, K. A1 - Manso, M. E. A1 - Maraschek, M. A1 - Martin, P. A1 - Mayer, M. A1 - McCarthy, P. J. A1 - McDermott, R. A1 - Meister, H. A1 - Menchero, L. A1 - Meo, F. A1 - Merkel, P. A1 - Merkel, R. A1 - Mertens, V. A1 - Merz, F. A1 - Mlynek, A. A1 - Monaco, F. A1 - Muller, H. W. A1 - Munich, M. A1 - Murmann, H. A1 - Neu, G. A1 - Neu, R. A1 - Nold, B. A1 - Noterdaeme, J. M. A1 - Park, H. K. A1 - Pautasso, G. A1 - Pereverzev, G. A1 - Podoba, Y. A1 - Pompon, F. A1 - Poli, E. A1 - Polochiy, K. A1 - Potzel, S. A1 - Prechtl, M. A1 - Puschel, M. J. A1 - Putterich, T. A1 - Rathgeber, S. K. A1 - Raupp, G. A1 - Reich, M. A1 - Reiter, B. A1 - Ribeiro, T. A1 - Riedl, R. A1 - Rohde, V. A1 - Roth, J. A1 - Rott, M. A1 - Ryter, F. A1 - Sandmann, W. A1 - Santos, J. A1 - Sassenberg, K. A1 - Sauter, P. A1 - Scarabosio, A. A1 - Schall, G. A1 - Schmid, K. A1 - Schneider, P. A. A1 - Schneider, W. A1 - Schramm, G. A1 - Schrittwieser, R. A1 - Schweinzer, J. A1 - Scott, B. A1 - Sempf, M. A1 - Serra, F. A1 - Sertoli, M. A1 - Siccinio, M. A1 - Sigalov, A. A1 - Silva, A. A1 - Sips, A.C.C. A1 - Sommer, F. A1 - Stabler, A. A1 - Stober, J. A1 - Streibl, B. A1 - Strumberger, E. A1 - Sugiyama, K. A1 - Suttrop, W. A1 - Szepesi, T. A1 - Tardini, G. A1 - Tichmann, C. A1 - Told, D. A1 - Treutterer, W. A1 - Urso, L. A1 - Varela, P. A1 - Vincente, J. A1 - Vianello, N. A1 - Vierle, T. A1 - Viezzer, E. A1 - Vorpahl, C. A1 - Wagner, D. A1 - Weller, A. A1 - Wenninger, R. A1 - Wieland, B. A1 - Wigger, C. A1 - Willensdorfer, M. A1 - Wischmeier, M. A1 - Wolfrum, E. A1 - Wursching, E. A1 - Yadikin, D. A1 - Yu, Q. A1 - Zammuto, I. A1 - Zasche, D. A1 - Zehetbauer, T. A1 - Zhang, Y. A1 - Zilker, M. A1 - Zohm, H. KW - PHYSICS KW - REFLECTOMETRY KW - TOKAMAK AB - The ASDEX Upgrade programme is directed towards physics input to critical elements of the ITER design and the preparation of ITER operation, as well as addressing physics issues for a future DEMO design. After the finalization of the tungsten coating of the plasma facing components, the re-availability of all flywheel-generators allowed high-power operation with up to 20 MW heating power at I(p) up to 1.2 MA. Implementation of alternative ECRH schemes (140 GHz O2- and X3-mode) facilitated central heating above n(e) = 1.2 x 10(20) m(-3) and low q(95) operation at B(t) = 1.8 T. Central O2-mode heating was successfully used in high P/R discharges with 20 MW total heating power and divertor load control with nitrogen seeding. Improved energy confinement is obtained with nitrogen seeding both for type-I and type-III ELMy conditions. The main contributor is increased plasma temperature, no significant changes in the density profile have been observed. This behaviour may be explained by higher pedestal temperatures caused by ion dilution in combination with a pressure limited pedestal and hollow nitrogen profiles. Core particle transport simulations with gyrokinetic calculations have been benchmarked by dedicated discharges using variations of the ECRH deposition location. The reaction of normalized electron density gradients to variations of temperature gradients and the T(e)/T(i) ratio could be well reproduced. Doppler reflectometry studies at the L-H transition allowed the disentanglement of the interplay between the oscillatory geodesic acoustic modes, turbulent fluctuations and the mean equilibrium E x B flow in the edge negative E(r) well region just inside the separatrix. Improved pedestal diagnostics revealed also a refined picture of the pedestal transport in the fully developed H-mode type-I ELM cycle. Impurity ion transport turned out to be neoclassical in between ELMs. Electron and energy transport remain anomalous, but exhibit different recovery time scales after an ELM. After recovery of the pre-ELM profiles, strong fluctuations develop in the gradients of n(e) and T(e). The occurrence of the next ELM cannot be explained by the local current diffusion time scale, since this turns out to be too short. Fast ion losses induced by shear Alfven eigenmodes have been investigated by time-resolved energy and pitch angle measurements. This allowed the separation of the convective and diffusive loss mechanisms. VL - 51 SN - 0029-5515 IS - 9 N1 - ISI Document Delivery No.: 818DPTimes Cited: 1Cited Reference Count: 45SI U1 - FP U2 - PDG U5 - a193177a90d5b600862ca1e40bcc67af ER -